
Watches · Wholesale & custom
Setting stones into a flat pendant is a straight line. Setting them into a bezel means the setter works around a curve, and every stone sits at a slightly different angle. If the seat is not cut to the curve, stones sit proud, catch on clothing, and come back. We set on our own bench in Guangzhou — 43 watch styles in the catalog, moissanite in D colour VVS, silver setting parts in 925 — and we tell you which parts of a given model can be changed before you order.
Six things decide the price and whether the piece survives daily wear.
On most models we can change the bezel setting, the dial setting, the plating colour and the strap. We cannot change the case geometry: a 41mm case stays 41mm, and lugs do not move. Movement is fixed per model and stated on the spec sheet. If a model cannot take a full dial set without removing the markers, we say so instead of setting over them.
Each stone is seated individually and checked for height against its neighbours. A stone set half a tenth of a millimetre high will catch light differently and read as a flaw in a photograph. That is the part of the work that takes time, and it is the part a buyer cannot see until the piece is in hand.
Stainless steel case, sapphire crystal on the models that specify it, movement per model — Japanese automatic or quartz. We do not claim water resistance on an iced-out piece: setting stones into a case removes material around the seals, and a watch that was rated before setting is not rated after it. Treat it as splash-resistant at best.
18K rose gold or rhodium plating over the setting parts, with a clear e-coat. The plating wears first where the watch contacts a desk, a cuff or a seatbelt — the caseback edge and the clasp. Re-plating is maintenance, not a defect, and we quote it as a service.
Around 5 pieces per style are held in stock. 1–2 pieces ship in 1–2 business days; a custom dial or bezel takes 7–10 days. Watches are quoted per piece and do not take the jewelry volume tiers — the margin on a watch does not carry a 30% discount.
Photos of the actual watch — dial, bezel, clasp, caseback — for your approval. If you sell online, ask for the four angles you need for the listing and we will shoot those.
We quote per style instead of publishing a list price — quantity, finish and stone size move the number. Small runs: 1 pc at retail, 3 pcs −20%, 5 pcs −30%; 10+ quoted per style. The tier discount applies to silver jewelry — watches are quoted piece by piece because the margin is thinner. The full catalog covers 354 styles.








The same wrist, the same metal. A chain and a bracelet ship in the same parcel — one lot of freight, one customs entry, one invoice.








Ask for the watch and the chain on one quote and we price them together — freight is per parcel, not per piece.
Same workshop, different category — the terms are the same.
No. We set watches we supply. Taking in a customer's watch means accepting liability for a movement and case we did not inspect, and the setting has to match a bezel we did not make.
It depends on the model. Some are bezel-set with a plain dial, some are fully iced. The spec sheet states which, because the stone count and the labour differ by a factor of three or four.
1 piece at the per-piece price. A custom dial or a modified bezel starts at 10 pieces per style, because the setting jig has to be built.
Treat it as splash-resistant only. Setting stones into a case disturbs the seals, and we do not represent an iced-out watch as water resistant.
No. 1 piece at the per-piece price, and quantity is quoted per order. The 20% and 30% tiers apply to silver jewelry only.
DHL or FedEx, 3–7 working days, tracked. USD 15 for one piece, free for two. Standard service is DAP — duty and VAT are settled by the receiver unless we quote door-to-door through a forwarder.
Style, quantity, material and target market. You get a price and a lead time back — not a catalog dump.
Prefer to talk? WhatsApp +86 195 2998 8201 — photos and video of the actual piece on request.